How to effectively clean car wiper is important in many aspects, mainly in ensuring a clear field of vision, protecting the glass and wipers, and ensuring driving safety. The details are as follows:

1. Ensure a clear field of vision:

When the car is driving, dust, stains, rain, snowflakes, etc. often appear on the windshield. If the wiper is not clean, it will not be able to effectively scrape off these debris, blocking the driver’s vision. The cleaned wiper can work more smoothly, wipe the windshield clean, provide the driver with a clear view of the front, and let the driver clearly observe the road conditions, traffic signals, the dynamics of other vehicles and pedestrians, etc.

2. Protect the windshield:

When there is dirt or debris on the surface of the wiper, it may generate greater friction with the windshield during the scraping process, and it is easy to leave scratches on the glass surface. In the long run, these scratches will affect the transparency of the glass and make it easier for the glass to absorb dust and water stains, forming a vicious cycle. Cleaning the wipers regularly can reduce damage to the windshield, extend its service life, and keep the glass in good condition.

3. Extend the service life of the wipers:

The rubber strips of the wipers will gradually age during use. If a large amount of dirt is attached to the surface, it will accelerate the wear and aging process of the rubber strips. Cleaning the wipers can remove particles and corrosive substances that may wear the rubber, maintain the softness and elasticity of the rubber strips, so that they can better fit the windshield, thereby extending the overall service life of the wipers and saving replacement costs.

4. Ensure driving safety:

A clear field of vision is one of the key factors for safe driving. In rainy, snowy or other severe weather conditions, clean car wipers can quickly and effectively remove rain or snow from the windshield, allowing the driver to judge the road conditions in a timely and accurate manner, make correct driving decisions, avoid traffic accidents such as rear-end collisions and collisions caused by unclear vision, and protect the life and property of themselves and others.

5. Improve driving experience:

A clean and efficient wiper will not make abnormal noise or jump when working, can smoothly clean the windshield, create a comfortable driving environment for the driver, reduce interference and troubles during driving, and make the driving experience more pleasant.

So how to effectively clean car wiper ? The following are the specific steps and relevant points for cleaning the wiper:

1. Clean car wipers

Preparation:

Prepare a clean and soft wet cloth or sponge, and an appropriate amount of glass cleaner.

2. Wipe the wiper blade:

Lift the wiper to separate the wiper blade from the windshield. Gently wipe the rubber part of the wiper blade with a wet cloth or sponge to remove dust, dirt and debris on the surface. Be careful to wipe along the length of the wiper blade to avoid wiping back and forth to cause damage to the rubber. For stubborn stains, you can wipe with a small amount of glass cleaner, but be careful to avoid the cleaner from contacting the car’s paint.

3. Check the wiper blade condition:

During the wiping process, carefully check whether the rubber of the wiper blade is worn, cracked or deformed. If the wiper blade is found to be seriously aged, it should be replaced in time to avoid affecting the cleaning effect and wiping performance.

4. Clean the windshield

Remove surface stains:

Spray the windshield with glass cleaner, and then gently wipe it with a clean soft cloth or paper towel to remove dust, oil, water stains and other stains on the glass surface. When wiping, pay attention to wipe from one side of the glass to the other side to avoid missing. For stubborn stains on the glass, you can spray more detergent and wipe it repeatedly with a soft cloth until the stains are removed.

Clean the edge of the glass:

The edge of the windshield is prone to accumulate dust and debris, and special attention needs to be paid to cleaning. You can gently wipe the edge of the glass with a soft cloth or brush to ensure that the edge is clean and tidy to avoid affecting the fit of the wiper.

5. Clean car wiper arm

Wipe the wiper arm:

Wipe the surface of the wiper arm with a damp cloth or sponge to remove dust and dirt. The bottom and joints of the wiper arm are prone to dirt and need to be cleaned carefully. You can use tools such as brushes or cotton swabs to clean them.

6. Check the connection of the wiper arm:

During the cleaning process, check whether the connection between the wiper arm and the car body is firm and whether there is any looseness or deformation. If there is a problem with the connection, it should be repaired or adjusted in time to ensure that the wiper can work properly.

In addition

In daily use, avoid using the wiper when the windshield is dry to avoid scratching the glass and wearing the wiper blades. At the same time, regular inspection and cleaning of the wiper can extend its service life and improve the safety of driving in rainy days.

The above are some tips on how to effectively clean car wiper. If you would want to know more, please feel free to contact us.

 

While providing professional car wipers, we also provide customers with professional car cleaning and care products, which can solve the problem of car cleaning in one stop, including car interior cleaning, car exterior cleaning, car windshield cleaning, car wheel cleaning, etc. If you want to know more, you can refer to our wowiper brand.